#!/bin/bash
#
#  Copyright (c) 2020, The OpenThread Authors.
#  All rights reserved.
#
#  Redistribution and use in source and binary forms, with or without
#  modification, are permitted provided that the following conditions are met:
#  1. Redistributions of source code must retain the above copyright
#     notice, this list of conditions and the following disclaimer.
#  2. Redistributions in binary form must reproduce the above copyright
#     notice, this list of conditions and the following disclaimer in the
#     documentation and/or other materials provided with the distribution.
#  3. Neither the name of the copyright holder nor the
#     names of its contributors may be used to endorse or promote products
#     derived from this software without specific prior written permission.
#
#  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
#  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
#  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
#  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
#  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
#  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
#  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
#  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
#  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
#  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
#  POSSIBILITY OF SUCH DAMAGE.
#

#
#  This script calls cmake and ninja to compile OpenThread for the given platform.
#
#  Compile with default build options:
#
#      script/cmake-build ${platform}
#
#  Compile with the specified build option enabled:
#
#      script/cmake-build ${platform} -D${option}=ON
#
#  Compile with the specified build option disabled that already enabled by default:
#
#      script/cmake-build ${platform} -D${option}=OFF
#
#  Compile with the specified ninja build target:
#
#      OT_CMAKE_NINJA_TARGET="ot-cli-ftd" script/cmake-build ${platform}
#      OT_CMAKE_NINJA_TARGET="ot-cli-ftd ot-cli-mtd" script/cmake-build ${platform}
#
#  Compile with the specified build directory:
#
#      OT_CMAKE_BUILD_DIR="./build/temp"  script/cmake-build ${platform}
#
#  Examples:
#
#      script/cmake-build simulation
#
#      script/cmake-build simulation -DOT_FULL_LOGS=ON -DOT_CHANNEL_MANAGER=OFF
#
#      OT_CMAKE_NINJA_TARGET="ot-cli-mtd" OT_CMAKE_BUILD_DIR="./build/temp" script/cmake-build simulation -DOT_FULL_LOGS=ON -DOT_CHANNEL_MANAGER=OFF
#

set -euxo pipefail

OT_CMAKE_NINJA_TARGET=${OT_CMAKE_NINJA_TARGET-}

OT_SRCDIR="$(cd "$(dirname "$0")"/.. && pwd)"
readonly OT_SRCDIR

OT_PLATFORMS=(simulation posix android-ndk)
readonly OT_PLATFORMS

OT_POSIX_SIM_COMMON_OPTIONS=(
    "-DOT_ANYCAST_LOCATOR=ON"
    "-DOT_BLE_TCAT=ON"
    "-DOT_BORDER_AGENT=ON"
    "-DOT_BORDER_AGENT_EPSKC=ON"
    "-DOT_BORDER_AGENT_ID=ON"
    "-DOT_BORDER_ROUTER=ON"
    "-DOT_CHANNEL_MANAGER=ON"
    "-DOT_CHANNEL_MONITOR=ON"
    "-DOT_COAP=ON"
    "-DOT_COAPS=ON"
    "-DOT_COAP_BLOCK=ON"
    "-DOT_COAP_OBSERVE=ON"
    "-DOT_COMMISSIONER=ON"
    "-DOT_COMPILE_WARNING_AS_ERROR=ON"
    "-DOT_COVERAGE=ON"
    "-DOT_DATASET_UPDATER=ON"
    "-DOT_DHCP6_CLIENT=ON"
    "-DOT_DHCP6_SERVER=ON"
    "-DOT_DIAGNOSTIC=ON"
    "-DOT_DNSSD_SERVER=ON"
    "-DOT_DNS_CLIENT=ON"
    "-DOT_ECDSA=ON"
    "-DOT_HISTORY_TRACKER=ON"
    "-DOT_IP6_FRAGM=ON"
    "-DOT_JAM_DETECTION=ON"
    "-DOT_JOINER=ON"
    "-DOT_LOG_LEVEL_DYNAMIC=ON"
    "-DOT_MAC_FILTER=ON"
    "-DOT_NEIGHBOR_DISCOVERY_AGENT=ON"
    "-DOT_NETDATA_PUBLISHER=ON"
    "-DOT_NETDIAG_CLIENT=ON"
    "-DOT_PING_SENDER=ON"
    "-DOT_RCP_RESTORATION_MAX_COUNT=2"
    "-DOT_RCP_TX_WAIT_TIME_SECS=5"
    "-DOT_REFERENCE_DEVICE=ON"
    "-DOT_SERVICE=ON"
    "-DOT_SNTP_CLIENT=ON"
    "-DOT_SRP_CLIENT=ON"
    "-DOT_SRP_SERVER=ON"
    "-DOT_SRP_SERVER_FAST_START_MODE=ON"
    "-DOT_UPTIME=ON"
)
readonly OT_POSIX_SIM_COMMON_OPTIONS

die()
{
    echo " ** ERROR: Openthread CMake doesn't support platform \"$1\""
    exit 1
}

build()
{
    local platform=$1
    local builddir="${OT_CMAKE_BUILD_DIR:-build/${platform}}"
    shift

    mkdir -p "${builddir}"
    cd "${builddir}"

    cmake -GNinja -DCMAKE_EXPORT_COMPILE_COMMANDS=ON -DOT_COMPILE_WARNING_AS_ERROR=ON "$@" "${OT_SRCDIR}"
    if [[ -z ${OT_CMAKE_NINJA_TARGET// /} ]]; then
        ninja
    else
        IFS=' ' read -r -a OT_CMAKE_NINJA_TARGET <<<"${OT_CMAKE_NINJA_TARGET}"
        ninja "${OT_CMAKE_NINJA_TARGET[@]}"
    fi

    cd "${OT_SRCDIR}"
}

main()
{
    if [[ $# == 0 ]]; then
        echo "Please specify a platform: ${OT_PLATFORMS[*]}"
        exit 1
    fi

    local platform="$1"
    # Check if the platform supports cmake.
    echo "${OT_PLATFORMS[@]}" | grep -wq "${platform}" || die "${platform}"

    shift
    local local_options=()
    local options=(
        "-DOT_SLAAC=ON"
    )

    case "${platform}" in
        android-ndk)
            if [ -z "${NDK-}" ]; then
                echo "
The 'NDK' environment variable needs to point to the Android NDK toolchain.
Please ensure the NDK is downloaded and extracted then try to run this script again

For example:
    NDK=/opt/android-ndk-r25c ./script/cmake-build-android

You can download the NDK at https://developer.android.com/ndk/downloads

            "
                exit 1
            fi

            NDK_CMAKE_TOOLCHAIN_FILE="${NDK?}/build/cmake/android.toolchain.cmake"
            if [ ! -f "${NDK_CMAKE_TOOLCHAIN_FILE}" ]; then
                echo "
Could not fild the Android NDK CMake toolchain file
- NDK=${NDK}
- NDK_CMAKE_TOOLCHAIN_FILE=${NDK_CMAKE_TOOLCHAIN_FILE}

            "
                exit 2
            fi
            local_options+=(
                "-DOT_LOG_OUTPUT=PLATFORM_DEFINED"

                # Add Android NDK flags
                "-DOT_ANDROID_NDK=1"
                "-DCMAKE_TOOLCHAIN_FILE=${NDK?}/build/cmake/android.toolchain.cmake"

                # Android API needs to be >= android-24 for `getifsaddrs()`
                "-DANDROID_PLATFORM=android-24"

                # Store thread settings in the CWD when executing ot-cli or ot-daemon
                '-DOT_POSIX_SETTINGS_PATH="./thread"'
            )

            # Rewrite platform to posix
            platform="posix"

            # Check if OT_DAEMON or OT_APP_CLI flags are needed
            if [[ ${OT_CMAKE_NINJA_TARGET[*]} =~ "ot-daemon" ]] || [[ ${OT_CMAKE_NINJA_TARGET[*]} =~ "ot-ctl" ]]; then
                local_options+=("-DOT_DAEMON=ON")
            elif [[ ${OT_CMAKE_NINJA_TARGET[*]} =~ "ot-cli" ]]; then
                local_options+=("-DOT_APP_CLI=ON")
            fi

            options+=("${local_options[@]}")
            ;;

        posix)
            local_options+=(
                "-DOT_TCP=OFF"
                "-DOT_LOG_OUTPUT=PLATFORM_DEFINED"
                "-DOT_POSIX_MAX_POWER_TABLE=ON"
            )
            options+=("${OT_POSIX_SIM_COMMON_OPTIONS[@]}" "${local_options[@]}")
            ;;
        simulation)
            local_options+=(
                "-DOT_LINK_RAW=ON"
                "-DOT_DNS_DSO=ON"
                "-DOT_DNS_CLIENT_OVER_TCP=ON"
                "-DOT_UDP_FORWARD=ON"
            )
            options+=("${OT_POSIX_SIM_COMMON_OPTIONS[@]}" "${local_options[@]}")
            ;;
        *)
            options+=("-DCMAKE_TOOLCHAIN_FILE=examples/platforms/${platform}/arm-none-eabi.cmake")
            ;;
    esac

    options+=(
        "-DOT_PLATFORM=${platform}"
    )
    options+=("$@")
    build "${platform}" "${options[@]}"
}

main "$@"
