menu "Application Level Tracing"

    choice APPTRACE_DESTINATION
        prompt "Data Destination"
        default APPTRACE_DEST_NONE
        help
            Select destination for application trace: trace memory or none (to disable).

        config APPTRACE_DEST_TRAX
            bool "Trace memory"
            select APPTRACE_ENABLE
        config APPTRACE_DEST_NONE
            bool "None"
    endchoice

    config APPTRACE_ENABLE
        bool
        depends on !ESP32_TRAX && !ESP32S2_TRAX
        select ESP32_MEMMAP_TRACEMEM
        select ESP32S2_MEMMAP_TRACEMEM
        select ESP32_MEMMAP_TRACEMEM_TWOBANKS
        select ESP32S2_MEMMAP_TRACEMEM_TWOBANKS
        default n
        help
            Enables/disable application tracing module.

    config APPTRACE_LOCK_ENABLE
        bool
        default !SYSVIEW_ENABLE
        help
            Enables/disable application tracing module internal sync lock.

    config APPTRACE_ONPANIC_HOST_FLUSH_TMO
        int "Timeout for flushing last trace data to host on panic"
        depends on APPTRACE_ENABLE
        range -1 5000
        default -1
        help
            Timeout for flushing last trace data to host in case of panic. In ms.
            Use -1 to disable timeout and wait forever.

    config APPTRACE_POSTMORTEM_FLUSH_THRESH
        int "Threshold for flushing last trace data to host on panic"
        depends on APPTRACE_DEST_TRAX
        range 0 16384
        default 0
        help
            Threshold for flushing last trace data to host on panic in post-mortem mode.
            This is minimal amount of data needed to perform flush. In bytes.

    config APPTRACE_PENDING_DATA_SIZE_MAX
        int "Size of the pending data buffer"
        depends on APPTRACE_DEST_TRAX
        default 0
        help
            Size of the buffer for events in bytes. It is useful for buffering events from
            the time critical code (scheduler, ISRs etc). If this parameter is 0 then
            events will be discarded when main HW buffer is full.

    menu "FreeRTOS SystemView Tracing"
        depends on APPTRACE_ENABLE
        config SYSVIEW_ENABLE
            bool "SystemView Tracing Enable"
            depends on APPTRACE_ENABLE
            default n
            help
                Enables supporrt for SEGGER SystemView tracing functionality.

        choice SYSVIEW_TS_SOURCE
            prompt "Timer to use as timestamp source"
            depends on SYSVIEW_ENABLE
            default SYSVIEW_TS_SOURCE_CCOUNT if FREERTOS_UNICORE && !PM_ENABLE
            default SYSVIEW_TS_SOURCE_TIMER_00 if !FREERTOS_UNICORE && !PM_ENABLE
            default SYSVIEW_TS_SOURCE_ESP_TIMER if PM_ENABLE
            help
                SystemView needs to use a hardware timer as the source of timestamps
                when tracing. This option selects the timer for it.

            config SYSVIEW_TS_SOURCE_CCOUNT
                bool "CPU cycle counter (CCOUNT)"
                depends on FREERTOS_UNICORE && !PM_ENABLE

            config SYSVIEW_TS_SOURCE_TIMER_00
                bool "Timer 0, Group 0"
                depends on !PM_ENABLE

            config SYSVIEW_TS_SOURCE_TIMER_01
                bool "Timer 1, Group 0"
                depends on !PM_ENABLE

            config SYSVIEW_TS_SOURCE_TIMER_10
                bool "Timer 0, Group 1"
                depends on !PM_ENABLE

            config SYSVIEW_TS_SOURCE_TIMER_11
                bool "Timer 1, Group 1"
                depends on !PM_ENABLE

            config SYSVIEW_TS_SOURCE_ESP_TIMER
                bool "esp_timer high resolution timer"

        endchoice

        config SYSVIEW_MAX_TASKS
            int "Maximum supported tasks"
            depends on SYSVIEW_ENABLE
            range 1 64
            default 16
            help
                Configures maximum supported tasks in sysview debug

        config SYSVIEW_BUF_WAIT_TMO
            int "Trace buffer wait timeout"
            depends on SYSVIEW_ENABLE
            default 500
            help
                Configures timeout (in us) to wait for free space in trace buffer.
                Set to -1 to wait forever and avoid lost events.

        config SYSVIEW_EVT_OVERFLOW_ENABLE
            bool "Trace Buffer Overflow Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Trace Buffer Overflow" event.

        config SYSVIEW_EVT_ISR_ENTER_ENABLE
            bool "ISR Enter Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "ISR Enter" event.

        config SYSVIEW_EVT_ISR_EXIT_ENABLE
            bool "ISR Exit Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "ISR Exit" event.

        config SYSVIEW_EVT_ISR_TO_SCHEDULER_ENABLE
            bool "ISR Exit to Scheduler Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "ISR to Scheduler" event.

        config SYSVIEW_EVT_TASK_START_EXEC_ENABLE
            bool "Task Start Execution Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Task Start Execution" event.

        config SYSVIEW_EVT_TASK_STOP_EXEC_ENABLE
            bool "Task Stop Execution Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Task Stop Execution" event.

        config SYSVIEW_EVT_TASK_START_READY_ENABLE
            bool "Task Start Ready State Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Task Start Ready State" event.

        config SYSVIEW_EVT_TASK_STOP_READY_ENABLE
            bool "Task Stop Ready State Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Task Stop Ready State" event.

        config SYSVIEW_EVT_TASK_CREATE_ENABLE
            bool "Task Create Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Task Create" event.

        config SYSVIEW_EVT_TASK_TERMINATE_ENABLE
            bool "Task Terminate Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Task Terminate" event.

        config SYSVIEW_EVT_IDLE_ENABLE
            bool "System Idle Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "System Idle" event.

        config SYSVIEW_EVT_TIMER_ENTER_ENABLE
            bool "Timer Enter Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Timer Enter" event.

        config SYSVIEW_EVT_TIMER_EXIT_ENABLE
            bool "Timer Exit Event"
            depends on SYSVIEW_ENABLE
            default y
            help
                Enables "Timer Exit" event.

    endmenu

    config APPTRACE_GCOV_ENABLE
        bool "GCOV to Host Enable"
        depends on APPTRACE_ENABLE && !SYSVIEW_ENABLE
        select ESP_DEBUG_STUBS_ENABLE
        default n
        help
            Enables support for GCOV data transfer to host.

endmenu
